Turning On/Off The Power - EverFocus EMV1200 FHD Quick Installation Manual

12ch/8ch hybrid mobile dvr

Hide thumbs Also See for EMV1200 FHD:

Table of Contents

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

2.12 Turning On / Off the Power

Before powering on the mobile DVR, please make sure the internal HDD have been installed

properly. Once you have completed the basic cable connections, you are ready to turn on the

mobile DVR. Simply plug in the power source. The POWER LED will light up if power is normal.

Once the system has finished loading, you can start setting up the menu options for the

mobile DVR.

To turn off the power, please go to OSD Root Menu > System > Sys Setting > Miscellaneous

setting page, and click Shutdown (refer to 6.7.7 Miscellaneous in the User's Manual). After the

message pops up as below, you can now turn off the power source.

Note that when the mobile DVR is placed in an environment where temperature is very low

(for example, -40°C, the mobile DVR will NOT turn on immediately.)

Table of Contents

Emv800 fhd