EverFocus EMV1200 FHD Quick Installation Manual page 11

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
The Mobile DVR will automatically detect when a new SD card has been inserted and the
below SD card format message will pop-up. Click Yes to format the SD card. The formatting
process will take about 30 ~ 60 seconds. Note that only the formatted SD card can be used for
alarm event backup recording function.
After installing the SD Card, it's recommended to enable the Record Overwrite function. The
Record Overwrite function enables the mobile DVR to overwrite the recordings when the card
space is full. If Record Overwrite is not enabled, the alarm event backup recording to the SD
card will stop when card space is full. The mobile DVR will automatically pop-up a "SD Card
Disk Full" message for notification. Users will have to replace a new SD card; or backup the SD
card recordings and then erase (format) the recordings to resume the alarm event backup
recording function.
To enable the Record Overwrite function, please go to OSD menu: System < Record < Record.
To remove the SD card, please go to the OSD menu: System < Storage < SD Card, and click the
Unmount SD button. Then you can safely remove the SD card from the mobile DVR.
10