Monitor Connection; Antenna Connection - EverFocus EMV400S FHD Quick Installation Manual

2.3.5 Monitor Connection

The mobile DVR has one Main Monitor port (VGA) and 1 Call Monitor port (BNC). You can
connect the monitors to the system through VGA and BNC ports. The Main and Call Monitor
ports can be used simultaneously. Make sure that the connected monitor's specifications comply
with these resolution requirements.
Main Monitor: The configuration can only be operated on the Main Monitor.
Call Monitor: The call monitor can display camera streams or perform sequence mode.

2.3.6 Antenna Connection

You can connect the mobile DVR to the 3G/4G or WiFi antenna for wireless networking. You can
also connect a GPS receiver to the mobile DVR to perform the GPS function.
3G Antenna
WiFi Installation: Connects a WiFi antenna to the Ant.3 port.
GPS Installation: Connects a GPS receiver to the GPS cable of the supplied D-Sub Cable.
3G Installation: Connects a 3G antenna to the Ant.1 port. Insert the 3G SIM card to the card slot
(see 3G/4G SIM Card Installation below).
4G Installation: Connects 2 4G antenna to both of the Ant.1 and Ant.2 ports. Insert the 4G SIM
card to the card slot (see 3G/4G SIM Card Installation below).
Video Output
Call Monitor (BNC) D-Sub Cable
4G Antenna
D-Sub Cable
EMV400S FHD / EMV400SSD Mobile DVR
Main Monitor (VGA)
WiFi Antenna
GPS Receiver
GPS cable
15