Minimum System Requirements - EverFocus EMV1200 FHD Quick Installation Manual

12ch/8ch hybrid mobile dvr

Hide thumbs Also See for EMV1200 FHD:

Quick installation manual (12 pages)

User manual (217 pages)

Table Of Contents

Table of Contents

Introduction

The latest EverFocus digital video recorder generation is based on H.264 compression

technology, resulting in enhanced recording capacity and improved network image transmission

speed with high image quality. The EMV800 FHD / EMV1200 FHD can support both of analog

(AHD/TVI/SD) and IP cameras, delivering up to 1080p (analog) and up to 4MP (IP) image quality.

Its comprehensive features along with the embedded 3-axis g-sensor function enable the almost

universal application of this mobile DVR series. It supports various interfaces such as alarm I/O,

three USB ports, one RS-485 and three RS-232 for connecting to devices such as Panic Button or

CAN bus. You can also optionally connect GPS receiver, 3G, 4G and Wi-Fi Antenna to the mobile

DVR. The design of RCA video/audio outputs at front panel makes your installation easy. You

can install one 2.5"hard disk or SSD in the mobile DVR. You can also install one SD Card for

alarm event backup recording. The User Interface has been specially designed to fit mobile

small-sized monitor.

EMV800 FHD / EMV1200 FHD are equipped with anti-shock and anti-vibration housing. The

aviation M12 connectors are also equipped. The power supply supports voltage regulator, and

delay on/off. In addition, the mobile DVRs are SAE-J1455, EN50155, E-Mark, CE and FCC

certified.

You can use EverFocus Mobile Applications, MobileFocus, to remotely view the camera streams

from the mobile DVR through your handheld devices; or use EverFocus Xfleet system for remote

fleet management. You can also use EverFocus EF-Reader to remotely back up recordings from

the HDD/SD card of the mobile DVRs. The mobile DVR series is the ideal solution for your mobile

surveillance needs.