Viessmann VITOSOL 300-T Installation Instructions Manual page 10

Vertical rooftop installation
3. Hook the roof hooks into the timber in
accordance with the dimensions
shown in the illustration on page 8.
4. Remove the drip tabs and protrusions
from the roof tiles where the roof
hooks are to be fitted.
5. Secure the roof hooks and position
the roof tiles.
Continue with "Mounting rail installa-
tion" on page 11.
Fitting roof hooks for slate roof
3.
1. Mark the position of the roof hooks in
accordance with the dimensions
shown in the illustration on pages 6
and 8.
2. Remove slates from the roof at the
hook contact points.
3. Secure the roof hooks to the roof sur-
face. Fit commercially available lead
flashing to protect against the ingress
of moisture.
10
(cont.)
4. Cover the roof.
Fitting roof hooks for corrugated
sheet roofs
7,8
2.
1. Mark the position of the roof hooks in
2. Position each roof hook at the level of
3. Secure each roof hook with screw
Continue with "Mounting rail installa-
tion" on page 11.
accordance with the dimensions
shown in the illustration on pages 6
and 8.
a batten onto the ridge of the roofing
sheet and, through the hole in the roof
hook, drill a further hole into the apex
of the corrugation.
7 8 mm and a sealing washer (on-
site provision) to the battens.
Continue with "Mounting rail installa-
tion" on page 11.
3.
2.