L42 Louvre Installation; Logo Placement - Napoleon GVF42-1N Installation And Operation Manual

5.8

L42 LOUVRE INSTALLATION

4.8 L42 louvre installation
A
B
4.9

logo placement

5.9 LOGO PLACEMENT
Remove the backing of the logo supplied and place on the screen cover, as illus-
Remove the backing of the logo supplied and place on the screen cover, as
trated.
indicated.
UPPER LOUVRES
UPPER LOUVRES
A
Insert the louvre tabs into the slots
located at the top left and right corners of
Insert the louvre tabs into the slots lo-
the unit. cated at the top left and right corners of
the appliance.
SLOT
TAB
B LOWER LOUVRES
LOWER LOUVRES
Insert the hinge clips into the slots lo-
HINGE
cated at the bottom left and right corners
Insert the hinge clips into the slots lo-
CLIP
of the unit.
cated at the bottom left and right corners
SLOT
To remove the louvres, pull the back tabs
of the appliance.
of the clips forward, while pushing the
louvre assembly back. Lift the clip.
To remove the louvres, pull the back tabs
of the clips forward, while pushing the
louvre assembly back. Lift the clip.
finishing
57.1A
LOGO
LOGO
W415-0379 / E / 04.24.12
21
W415-0379 / F / 06.11.18
EN