Nailing Tab Installation - Napoleon GVF42-1N Installation And Operation Manual

framing
4.4

NAILING TAB INSTALLATION

EN
3.5 nailing tab installation
A. Attach the nailing tabs to the corner posts using the 2 sheet metal screws sup-
plied. Secure through the centre of the top and bottom slots in the nailing tab and
A. Nailing tabs are provided as part of the frames, as shown. To
then through the existing holes in the corner posts. If there are no existing holes,
determine the final location and where to bend the nailing tabs you
follow these instructions:
must first determine the thickness of your finishing material (i.e.
drywall). This will determine the dimension from the front edge of the
B. To determine the fi nal location of the nailing tab you must fi rst determine the
corner post to the nailing tab. Once the nailing tab is in the desired
thickness of your fi nishing material (i.e. drywall). This will determine the dimen-
location and secure using an appropriate fastener*.
sion from the front edge of the corner post to the nailing tab. Once the nailing tab
is in the desired location, drill through the centre hole of the nailing tab. Secure
with a sheet metal screw*.
* Additional fasteners may be installed.
* Additional set screws may be installed.
16
W415-0379 / F / 06.11.18
ADD
IMAGE
NAILING TAB HERE
37.1
55.1A
W415-0379 / E / 04.24.12