L42 Louvre Installation; Porcelain Reflective Panels; Grate Installation - Napoleon BGD42N Installation And Operating Instructions Manual

6.2

L42 LOUVRE INSTALLATION

A
B
6.3

PORCELAIN REFLECTIVE PANELS

Remove the upper louvres, and open the
A.
glass door. Remove the logs.
Remove the two securing screws located
B.
on either fi rebox side.
Place the left panel against the left side
C.
of the fi rebox, ensuring that it butts up
to the rear panel. Secure in place using
2 of the screws previously removed.
Repeat for the right side.
Replace the logs, glass door and
D.
louvres.
6.4

GRATE INSTALLATION

The grate for this appliance has been removed for
shipping purposes.
The grate must be installed before the logs are
installed.
Remove the packaging from the grate and install onto
the two pins as illustrated.
UPPER LOUVRES
A
Insert the louvre tabs into the slots
located at the top left and right corners of
the unit.
SLOT
TAB
LOWER LOUVRES
B
Insert the hinge clips into the slots lo-
HINGE
cated at the bottom left and right corners
CLIP
of the unit.
SLOT
To remove the louvres, pull the back tabs
of the clips forward, while pushing the
louvre assembly back. Lift the clip.
33
57.1A
W415-0777 / E / 08.26.13
EN