Additional Wireless Remote Features; Data Box View - Humminbird AS RC Operation Manual

A
DDITIONAL
Review the following sections for additional wireless remote features.

Data Box View

The Data Box View is a full screen display of data (or digital readout) boxes. Before proceeding,
review the following information:
• Data Box View (1) and Data Box View (2): There are two Data Box Views available; each one
displays different data boxes. To switch between the two views, press and hold the DATA BOX
key.
• SOLIX and ONIX: The data boxes in the Data Box Views can be customized, see the section
Edit the Data Boxes in the Data Box View (SOLIX and ONIX only).
• Remote Battery Status Icon: The Data Box View includes a battery status icon that displays
the remaining battery life of the wireless remote (ONIX and HELIX only). When the battery life
appears low, replace the battery (see Wireless Remote Setup: Install the Battery in the
Remote).
NOTE: If the remote hasn't been used for several seconds, the remote will enter
power save mode. When the remote is in power save mode, the battery status icon
will be removed from the Data Box View and the remote will be listed as disconnected.
You can resume operation at any time by pressing any key on the remote.
SOLIX NOTE: The battery status icon is available under the Remote Options menu
(Bluetooth tool > Remote Options > Battery Status).
NOTE: See your control head operations manual for more information about data
or digital readout boxes.
Display the Data Box View
1. Press the DATA BOX key
2. Close: Press the DATA BOX key to close the Data Box View.
Switch Between Data Box View (1) and Data Box View (2)
1. Press and hold the DATA BOX key on the wireless remote.
2. Close: Press the DATA BOX key to close the Data Box View.

Additional Wireless Remote Features

W R
IRELESS
once on the wireless remote.
F
EMOTE EATURES
25