Test The Remote - Humminbird AS RC Operation Manual

NOTE: If the remote hasn't been used for several seconds, the remote will enter power
save mode. When the remote is in power save mode, the battery status icon will be
removed from the Data Box View and the remote will be listed as disconnected.
You can resume operation at any time by pressing any key on the remote.

3 | Test the Remote

1. Select a view to display on-screen.
2. Test the Remote: Press the Data Box key
the control head.
3. Press the Data Box key again. Confirm the Data Box View closes.
4. Repeat: Walk around the boat and repeat steps 2 and 3 to confirm that there is no
interference from any location on the boat.
once. Confirm the Data Box View displays on
10
Installation Preparation