Getting Started; Power On; Confirm Connection On The Control Head - Humminbird AS RC Operation Manual

G S
ETTING TARTED
Proceed to the following sections to get started using the wireless remote.

1 | Power On

1. Press the POWER key to power on your control head.
2. Start Normal operation.

2 | Confirm Connection on the Control Head

NOTE: If the remote hasn't been used for several seconds, the remote will enter
power save mode. When the remote is in power save mode, the battery status icon
will be removed from the Data Box View and the remote will be listed as disconnected.
You can resume operation at any time by pressing any key on the remote.
SOLIX
Use the following instructions to confirm wireless connection on the SOLIX control head.
1. From the Home screen, select Settings.
2. Select Network > Network Info.
3. Confirm the wireless remote is listed under This Unit.
NOTE: The remote icon is also available under the status bar.
confirm
the remote
connection

Getting Started

Confirming Connection on SOLIX
15
remote
icon in
status bar