Miele H6860BPXB Operating And Installation Instructions page 132

Cleaning and care
The Evaporate residual moisture
process will begin after the third rinsing
process.
 Remove the container and tube from
the oven.
 Close the door.
 Confirm with OK.
Steam can cause scalding.
Do not open the door while the
residual water is being evaporated.
The oven heating will switch on and the
duration for the evaporation process will
count down in the display.
During the evaporation process, the
duration may be adjusted by the system
according to how much water is
currently present.
At the end of the evaporation process a
message will appear in the display with
advice on cleaning after running the
descaling programme.
 Confirm with OK.
A buzzer will sound if the buzzer is
switched on (see "Settings – Buzzer
tones"). Prog. finished
display.
132
will appear in the
 Switch the oven off.
Danger of burning.
Allow the oven interior and
accessories to cool down before
cleaning them.
 Remove the universal tray and empty
it. Clean the oven interior to remove
any condensation and descaling
agent residue.
Leave the oven door open until the
oven interior is completely dry.