Troubleshooting - Nikon KeyMission 360 User Manual

Color
Red/Green

Troubleshooting

If the camera fails to function as expected, check the list of common problems below
before consulting your retailer or Nikon-authorized service representative.
See the KeyMission 360/SnapBridge 360/170 Online Manual for more information
(Aii).
Power and Setting Issues
Problem
The camera is on
but does not
respond.
The camera does
not turn on.
42
Technical Notes
Status
Flashing at the
same time
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert the
battery or batteries or, if you are using an AC adapter,
disconnect and reconnect the AC adapter.
Note that although any data currently being recorded will
be lost, data that have already been recorded will not be
affected by removing or disconnecting the power source.
Check the lamp display.
The buttons of the camera are disabled during remote
photography. To operate the buttons of the camera, exit
remote photography.
Buttons can be operated only to turn off the camera while
a live image is output.
The battery is exhausted.
Description
The firmware is being updated.
Cause/Solution A
–
5
40
–
–
4, 36