Pairing With A Smart Device; When Not Using Nfc - Nikon KeyMission 360 User Manual

C
SnapBridge 360/170
The display language is automatically set according to the display language of the smart
device. If the display language of the smart device is not supported by SnapBridge 360/
170, it is set to English.
See the online manual for more information on use (Aii).
For an overview, you can also visit the dedicated Nikon website.
http://snapbridge.nikon.com

Pairing with a Smart Device

When Not Using NFC

1
Prepare for pairing (A13).
2
Launch SnapBridge 360/
170, tap Connect to
camera in the
a Connect tab, and
then tap KeyMission
360.
3
Check that the camera is
off, and then tap Next.
14
Using SnapBridge 360/170
Connect
Connect to camera
Pairing with the Camera
Turn the camera off
If the camera is on, hold the movie button for
about 3 seconds until the camera power lamp
turns off.
Note: Be sure a memory card is inserted.
Next
Pairing with the Camera
Select a camera for pairing.
Pairing with the Camera
Hold the movie button for 7 seconds
After 3 seconds, the camera will play the
power-on sound.
Keep the button pressed.
The camera is ready for pairing when the
indicator lamps start to flash alternately.
Searching...