Nikon KeyMission 360 User Manual page 40

Option
Send while
shooting
Wi-Fi
Network
menu
Bluetooth
Restore
default
settings
Movies
Shooting
options
Still images
26
Changing the Settings
When SnapBridge 360/170 M a Connect tab M Auto
download is on, still images captured after setting Send
while shooting M Still images to Yes are
automatically sent to the paired smart device.
Movies cannot be sent automatically. Movies can be
sent using Download pictures (A22).
Configure Wi-Fi connection settings.
If Send while off is set to Yes, the camera
communicates with the smart device even when the
camera is off. If it is set to No, communication stops
when the camera turns off.
Restore all Network menu settings to their default
values.
The connection with the smart device is disconnected.
The camera is paired with the most recently paired
remote control.
Movie mode: Select a movie mode.
Standard movie (default setting): Record normal
movies.
Superlapse movie: Record movies and save them in
fast motion.
Loop recording: If the camera exceeds the specified
time when recording a movie, the camera continues
recording while deleting the recorded movie data
from the beginning.
Time-lapse movie: Automatically capture still images
at a specified interval to create time-lapse movies.
Movie options: Select the movie image size/frame rate.
Default setting: 1920/24p
NTSC/PAL: Select the frame rate used when recording
movies.
Wind noise reduction: Set whether or not to reduce
wind noise during movie recording.
Default setting: No
Image size: Set the still image size.
Default setting: 7744×3872
Self-timer: Automatically capture still images when a
preset time has elapsed.
Default setting: 2 s
Description