Txm16 And Txm20 Features - Samson Powered Mixers TXM20 Owner's Manual

TXM16 and TXM20 Features

The Samson TXM16 and TXM20 powered mixers are
comprehensive, all-in-one mixer/power amplifier
solutions for a variety of live sound applications.
Here are some of their main features:
• The TXM16 and TXM20 are sixteen and twenty
channel powered mixers in ergonomically correct,
table-top enclosures providing easy to see and
easy to operate front panel controls. In addition,
the TXM16 can be rack mounted using the includ-
ed eleven-space rack mount kit.
• Both TXM mixers use the same massive 1000-watt
power amplifier section, featuring three modes
of operation; 2 x 500-watts Stereo Main, or 500-
watt Mono Main/500-watt Monitor, or 1000-watts
Bridged Mono. And those power ratings are true
RMS, measured at full bandwidth.
• Ample inputs, the TXM16 has eight mic/line
inputs plus four stereo line inputs, while the
TXM20 features twelve mic/line inputs plus four
stereo line inputs. Plus dedicated stereo returns
for the onboard effects.
• The TXM16 has a built-in, 24-bit DSP (Digital
Signal Processor) Multi-effects Processor with 100
selectable presets offering dazzling studio quality
effects including Reverb, Delay and Chorus and
Flanging. The TXM20 feature two 24-bit DSP's,
each with 100 selectable presets of studio quality
effects on each input.
• The TXM series mixers feature high-quality, low-
noise microphone pre-amplifiers that can accept a
signal from most any standard microphone. With
the mixer's XLR connectors, connecting standard
low impedance dynamic mics is simple, and con-
denser microphones are connected easily using
the available 48 Volt Phantom Power.
• Each of the TXM16 and TXM 20's mic / line chan-
nels feature a convenient Insert Point jack to patch
in external effects and a Three-band Equalizer
with variable mid-range control enabling you to
tailor the tonal response of each input.
• The TXM 16 has three auxiliary sends. Two Aux
sends on each channel for building two inde-
pendent monitor mixes, plus a third EFX send
for sending signal to the internal Multi-effects
Processor. The TXM 20 has 4 auxiliary sends. One
dedicated Aux send for monitors, plus a second
Aux send that can be set up to be either a monitor
send or an effects send using the Pre/Post switch,
and two additional EFX sends for sending to the
dual internal multi-effects processors.
• A Stereo 9-band Graphic Equalizer for the Main
left and right outputs, plus a Mono 9-band for the
Monitor output, allow the TXM mixers to be set-up
for maximum gain before feedback.
• Mono/ Subwoofer Output with variable Low-pass
Filter.
• A convenient Tape/CD Input is provided so you
connect a stereo device for accompaniment or
background music.
• The brilliant sound quality is achieved thanks to
the advanced circuit design, utilizing low-noise
operational amplifiers and low impedance busing.
• Durable steel enclosure is road tough insuring reli-
able performance from night to night and venue
to venue.
• The convenient, oversize grip handle make the
units easy to carry.
• Three-year extended warranty.
2