Konica Minolta AccurioPress C2070 Daily Maintenance Manual page 116

3.6 Details of quality adjustment items
6
Select a paper size for the chart.
% Load paper of A3 w, 11 e 17 w, 12 e 18 w, 13 e 19 w, or SRA3 w into the tray, and select the
button of the tray.
7
Press Start on the control panel.
Charts are output, and the [Density Balance Auto. Adjustment] screen is displayed.
8
Load the output test chart on the Original Glass as shown in the example on the screen.
% Turn the arrow mark of the test chart to the back, then face the print side downward.
% Take the test chart away from the vertical size guide by 2 inches (5 cm), then push it against the
horizontal size guide to load the test chart.
% Place about 10 sheets of blank copy paper on the test chart.
% Close the ADF.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
3
3-45