Adjustment Flow When Changing The Screen; Adjustment Timing; Adjustment Sequence - Konica Minolta AccurioPress C2070 Daily Maintenance Manual

3.5

Adjustment Flow when changing the screen

3.5 Adjustment Flow when changing the screen
3.5.1

Adjustment timing

When the screen is changed
Tips
-
This adjustment is the same as the adjustment when the machine was introduced (setup).
3.5.2

Adjustment sequence

- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is not mounted
Ad- Adjustment item
just-
ment
order
1 Custom Screen Setting
2 [Gamma Automatic Adjustment]
3-a [Density Balance Adjustment] (for i1Pro, i1Pro2, or i1iSisXL)
3-b [Density Balance Adjustment] (for FD-5BT)
4 Controller Calibration
5-a Exact Color
5-b G7 Calibration
- When an RU optional unit (Relay Unit RU-509/Relay Unit RU-518) is mounted
Ad- Adjustment item
just-
ment
order
1 Custom Screen Setting
2 [Gamma Automatic Adjustment]
3-a [Density Balance Auto. Adj.]
3-b [Density Balance Adjustment] (for i1Pro, i1Pro2, or i1iSisXL)
3-c [Density Balance Adjustment] (for FD-5BT)
4 [Color density manual control]
5-a Exact Color
5-b G7 Calibration
Tips
-
If you use [Package Color Auto Adj.], this machine automatically executes step 2 and after. To use
[Package Color Auto Adj.], mount Intelligent Quality Optimizer IQ-501 on the machine. For details,
refer to page 3-103.
- Adjustment 5 is set to Exact Color by default. To switch this adjustment to G7 calibration, contact your
service representative.
-
For "Color Density Control setting check", we recommend that you select [Each Paper Type Color Adj.]
to use special paper or increase the accuracy of the automatic adjustment.
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
3
Reference
page 3-7
page 3-9
page 3-11
page 3-21
page 3-76
page 3-83
page 3-94
Reference
page 3-7
page 3-9
page 3-39
page 3-11
page 3-21
page 3-73
page 3-83
page 3-94
3-6