Picture - Runco Video Xtreme VX-40d Owner's Operating Manual

Table 4-1. Aspect Ratio Settings (continued)
Remote
Aspect Ratio Control
Key
Virtualwide 2.35 SVC
Use the controls in the Picture Menu to calibrate your VX-40d/-50d/-60d/-80d for
optimum picture quality.
The VX-40d/-50d/-60d/-80d has been designed to incorporate setup and calibration
standards established by the Imaging Science Foundation (ISF). The ISF has developed
carefully crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF certified installation
technician.
All signal types require separate processing. Therefore, you need to calibrate each DHD
Controller input separately. Runco recommends calibrating the inputs in this order:
1. Component SD
2. S-Video 1 / S-Video 2
3. Composite
4. HD/RGB 1 / HD/RGB 2
5. DVI 1 / DVI 2
When you change a picture quality setting, save the change to a
Note
preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input separately.) For information about saving settings, refer
to ISF Presets on page 66.
Runco VX-40d/-50d/-60d/-80d Owner's Operating Manual
Description
A 2.35 image is stretched
anamorphically in both direc-
tions to fill a 16:9 image. (The
2.35:1 Image on
16:9 Screen
secondary anamorphic lens then
"stretches" the image back to
2.35:1.)
Virtualwide 2.35 is available only
2.35:1 Image on
on VX-40d/-50d/-60d/-80d pro-
16:9 Screen with
VirtualWide 2.35 jectors equipped with the Cine-
Wide option.
2.35:1 Image on
2.35:1 Screen with
VirtualWide 2.35
61
Operation

Picture

Picture
Brightness
Contrast
Color
Tint
Sharpness