Controller Connection - Runco Video Xtreme VX-6000d Owner's Operating Manual

Installation
RS-232 Controller
Connection
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation
system (if present) to the RS-232 Control port on the DHD Controller; see Figure 3-13.
For more information about using this connection, refer to Serial Communications on
page 79.
TRIGGERS
1 2
Pb Pr Y S-Video 1
Component Video Video S-Video 2 RS-232 Out
to Automation/
Control System
or PC
Figure 3-13. RS-232 Control System Connection
IR
3
RS-232 Control
36 Runco VX-6000d Owner's Operating Manual
5 4 3 2 1
9 8 6
7
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)