Connecting An Audio Processor Or Secondary Display Device To The Dhd Controller (Optional); Audio Processor Connection To Dhd Controller - Runco Signature Cinema SC-50d Series Installation & Operation Manual

Installation
Connecting an Audio
Processor or Secondary
Display Device to the DHD
Controller (Optional)
Downloaded From projector-manual.com Runco Manuals
The DHD Controller provides a second HDMI output (labeled HDMI Out (Audio Only)) for
connection to an audio receiver/switching system or secondary display device for
monitoring purposes. See Figure 3-16.
The DHD Controller does not transmit HDMI CEC control
Note
messages from the "HDMI Audio Out" connector. For more
information about CEC, refer to Using HDMI CEC Messages on
page 94.
TRIGGERS TRIGGERS
USB USB
1 1 2 2 3 3
Component / SCART Component / SCART
HDMI 1 HDMI 1
Y Y Video 1 Video 1 Video 2 Video 2
D1 1
D2 2
Pb Pb Pr Pr Video 3 Video 3
HDMI 2 HDMI 2
Audio Processor/
Figure 3-16. Audio Processor Connection to DHD Controller
36
Display Control Display Control
RS-232 RS-232
IR IR
To Accessory Box To Accessory Box
HDMI Out HDMI Out
HDMI 3 HDMI 3
To Display To Display
HDMI Out
HDMI 4 HDMI 4 Ethernet Ethernet
Audio Only
Secondary Display
Switcher
or
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual