Picture Adjust (Advanced) - Runco Video Xtreme VX-6000d Owner's Operating Manual

Operation

Picture Adjust (Advanced)

ICC Adjust
TM
BrilliantColor
SD Advanced Mode
Film Mode
Video NR
MNR
Sharpness Enhancement
Automatic Contrast
ICC Adjust
Default
ICC- Hue
ICC - Saturation
ICC - Intensity
Default
R
Red 0
Yellow 0
G
Green 0
C
Cyan 0
Blue 0
M
Magenta 0
Default
Contrast: Refer to Contrast on page 55.
Brightness: Refer to Brightness on page 54.
Color: Refer to Color Saturation on page 55.
Tint: Refer to Tint on page 56.
Sharpness: Refer to Sharpness on page 57.
Color Temp.: To adjust the color temperature, select Color Temp. from the Picture
Adjust menu. (Color temperature defines the "color of gray.") Press
5500, 6500, 7500, 8500, 9300 or 10500. In most cases, 6500 or 7500 will produce the
most realistic colors. Higher settings produce a "bluer" picture; lower ones cause the
image to appear more red.
White Balance: Select White Balance from the Picture Adjust menu to choose a white
balance preset (or "gamma curve") to store in the currently-selected picture memory. For
more information on white balance presets, refer to White Balance on page 70.
RVR: Iris: Select RVR: Iris from the Picture Adjust menu to increase or decrease the
Reflectance Volume Regulation setting. RVR lets you control the aperture or iris size (the
physical opening through the lens; similar to an "f-stop" on a camera). Doing so allows you
to optimize brightness and contrast according to the amount of ambient light in the
viewing area.
Select High Brightness or Theater for rooms with lots of ambient light. Select CRT
Emulation for more "theater-like" viewing conditions (little or no ambient light).
Lamp Power: Select Lamp Power from the Picture Adjust menu to adjust the lamp
output level. You can choose to run the lamp as bright as possible (220W; this is the
default setting) or you can choose the lower setting (180W). Generally, lower lamp output
can prolong the life of the lamp, but decreases brightness.
To access advanced picture quality settings, select Advanced from the Picture Adjust
menu. This sub-menu presents the following options:
ICC: Select ICC from the Advanced Picture Adjust menu to customize the displayed color
space. The adjustments you make here are stored in the currently-selected "Picture
Memory" preset.
For each of the six primary colors – red, yellow, green, cyan, blue and magenta – you can
adjust the following:
• Hue: These slidebars adjust the red/green color hue for true color reproduction of
video signals. For best results, adjust the hue while displaying an external color bar test
pattern (Figure 4-4).
R
Changing the hue of a primary color affects the gamut (range) of possible colors. For
Y Y
G
example, changing the value for red moves the color closer to either yellow or magenta,
C
which in turn affects all displayed colors having a red component.
B B
M
68 Runco VX-6000d Owner's Operating Manual
or to select