Main Menu - Runco Video Xtreme VX-2000d Operating Manual

Operation

Main Menu

Overscan +
➤
Press MENU on either the remote control or built-in keypad (on the projector rear panel)
to display the Main Menu, shown in Figure 4-7. The Main Menu is the starting point for
calibrating the VX-2000d to optimize the display of digital 1080i and 1080p sources.
Picture Adj.
Picture Memory
Contrast
Brightness
Color
Tint
Sharpness
CLR Temp.
White Balance
RVR :Iris
Lamp Power
Advanced
Default
Figure 4-7. VX-2000d Main Menu (1080i Digital or 1080p Sources Only)
To use the on-screen menus:
1. Press or
2. Press or
3. For items that present a list of choices, such as Picture Memory:
a Press ENTER or
b Press
c Press ENTER again to confirm your selection.
d Press
– OR –
For items that are represented by numeric values, such as Contrast:
a Press
b Press
– OR –
a Press ENTER to hide the "parent" menu and display only the slidebar for that item.
- 5
b Press
c Press
4. To switch from one sub-menu to another (for example, Picture Adjust to White
Balance), press
5. Press MENU to hide the OSD menus.
White Balance
1
0
0
0
0
0
7500
1
1
Hi
to select a sub-menu.
to select a sub-menu item.
.
or to select a value from the list.
to return to the menu.
or to adjust the value.
or to select another menu item.
or to adjust the value.
or to select another item to adjust or ENTER to return to the menu.
repeatedly until no menu item is highlighted. Then, press
54
HD/RGB Adj. Options
Runco VX-2000d Owner's Operating Manual
Language
or .