Runco Video Xtreme VX-2000d Operating Manual page 25

1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. ON / OFF
Press to turn the projector on or off.
3. ENTER
Press to select a highlighted menu item or confirm a changed setting.
4. Cursor Buttons ( ,
Use these buttons to select items or settings, adjust settings or switch display
patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema - Virtual
Cinema
DOWN Button = Virtual Cinema - Cinema - VirtualWide - Letterbox - Standard (4:3) -
Anamorphic
Virtual Cinema is available only on the VX-2000d/CineWide and
Note
only on the analog inputs (HD/RGB, SD Component, Composite
and S-Video). For more information about aspect ratios, refer to
Table 4-1.
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in
this order:
LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video
2 - S-Video 1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 -
HD/RGB 2 - HDMI 1 - HDMI 2
The "direct select" function of the UP, DOWN, LEFT and RIGHT
Note
buttons is available only on the analog inputs (HD/RGB, SD
Component, Composite and S-Video).
5. LIGHT
Press to illuminate the buttons.
6. MENU
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
7. VIDEO (1)
Press to select Composite video input as the source or to enter the numeric
character "1."
8. COMP (Component) (2)
Press to select Component SD (480i/576i) video input as the source or to enter the
numeric character "2."
Runco VX-2000d Owner's Operating Manual
, , )
13
Controls and Functions