Runco Video Xtreme VX-2000d Operating Manual page 68

Operation
Table 4-2. Default Picture Memory Settings for Digital 1080i and 1080p
Sources (continued)
Picture
Memory Description
Setting
ISF Night For viewing images with
the brightness slightly
increased in a darkened
room.
Contrast: Refer to Contrast on page 43.
Brightness: Refer to Brightness on page 42.
Color: Refer to Color Saturation on page 43.
Tint: Refer to Tint on page 44.
Sharpness: Refer to Sharpness on page 45.
Color Temp.: To adjust the color temperature, select Color Temp. from the Picture
Adjust menu. (Color temperature defines the "color of gray.") Press
5500, 6500, 7500, 8500, 9300 or 10500. In most cases, 6500 or 7500 will produce the
most realistic colors. Higher settings produce a "bluer" picture; lower ones cause the
image to appear more red.
White Balance: Select White Balance from the Picture Adjust menu to choose a white
balance preset (or "gamma curve") to store in the currently-selected picture memory. For
more information on white balance presets, refer to White Balance on page 58.
RVR: Iris: Select RVR: Iris from the Picture Adjust menu to increase or decrease the
Reflectance Volume Regulation setting. RVR lets you control the aperture or iris size (the
physical opening through the lens; similar to an "f-stop" on a camera). Doing so allows you
to optimize brightness and contrast according to the amount of ambient light in the
viewing area.
Select High Brightness or Theater for rooms with lots of ambient light. Select CRT
Emulation for more "theater-like" viewing conditions (little or no ambient light).
Lamp Power: Select Lamp Power from the Picture Adjust menu to adjust the lamp
output level. You can choose to run the lamp as bright as possible (220W; this is the
default setting) or you can choose the lower setting (180W). Generally, lower lamp output
can prolong the life of the lamp, but decreases brightness.
Default Settings for Selected Picture
6500 CRT
Emulation
56 Runco VX-2000d Owner's Operating Manual
Memory
Low Off Off
(180W)
or to select
ISF
NIGHT