Runco Video Xtreme VX-2000d Operating Manual page 84

Serial Communications
Table 6-1. Serial Commands (continued)
Parameter
Command
(min/max)
The following serial commands are meant to emulate buttons on the remote control or DHD Con-
troller front panel. Each button has its own serial command, so effectively it is as if you were using
the IR remote only you'll be doing so via serial commands. These commands provide active OSD
responses just like the IR remote.
DOWN NA
ENTER NA
LEFT NA
MENU NA
RIGHT NA
UP NA
Value
Stored?
NA Down-Arrow (
NA ENTER key
NA Left-Arrow (
NA MENU
NA Right-Arrow (
NA Up-Arrow (
72 Runco VX-2000d Owner's Operating Manual
Description
) key
) key
) key
) key