Installation; Remote Control; Battery Installation; Notes On Remote Control Operation - Runco Video Xtreme VX-2000d Operating Manual

To install batteries in the remote control:
1. Remove the battery cover from the back of
the remote control.
2. Insert the batteries included with the remote
control. Ensure that the polarities correctly
match the and
battery compartment.
3. Replace the battery cover.
1. Do not mix an old battery with a new one or different types of
Note
batteries.
2. If you will not use the remote control for a long time, remove the
batteries to avoid damage from battery leakage.
The remote control can be used to control the VX-2000d within the ranges shown in
Figure 3-1.
Approx.
7m /23ft
Figure 3-1. Available Range of the Remote Control
Runco VX-2000d Owner's Operating Manual
markings inside the
17

3. Installation

3.1

Remote Control

Battery Installation

Notes on Remote Control
Operation