BCM Technical Configuration Guide
1. Introduction
Point to point video conference systems have become imbedded into the fabric of today's small and medium
business who are seeking cost reductions by leveraging their telecommunications infrastructure. To this end,
Nortel's Business Communications Manager (BCM) provides the necessary converged infrastructure to enable
this type of application.
This document is the result of a specific customer request for configuration information regarding point-to-point
video conference system based upon a Polycom VideoStation connected to a BCM via BRI. Considerable time
and effort were needed to secure the components needed to build this configuration which is intended to closely
mimic a legacy customer system.
1.1 Applicability & Baseline
This document was created within the following context:
BCM 200 platform running appropriately patched BCM 3.7 software
Polycom VS 512, running release 7.2 (10 March 2002) software
1.2 Reference Network
Loop 601
DN: 2484
DN: 2485
_______________________________________________________________________________________________________________________
NORTEL
V1.1
Destination
Video Unit
DN: 395-1428
Pool: PRI-A
(access code 6)
DN
SPID
2484
248400
2485
248500
Figure 1: Reference Topology
External Distribution
May, 2006
5