Multiple Loop Setup; Polycom; Figure 14: Target Line; Figure 15: Target Line - Recieved Number - Nortel BCM 200 Technical Configuration Manual

BCM Technical Configuration Guide

2.8 Multiple Loop Setup

The previous examples detail the programming of two complete BRI loops, a total of four B channels, to the video
unit. It should be noted that additional loops can be utilized, and the programming is an extrapolation of the
information given above.
It should be noted that during the development of this document, three (384 Kbps) and four (512 Kbps) loop
configurations were setup and tested.

2.9 Polycom

The unit utilized for our testing was a VideoStation 512 running software Release 7.2 – March 10, 2002.
_______________________________________________________________________________________________________________________
NORTEL
V1.1

Figure 14: Target Line

Figure 15: Target Line - Received Number
External Distribution
May, 2006
14