BCM Technical Configuration Guide
V1.1
May, 2006
Note that a second target line for the second B channel is not needed, and should not be configured.
Also, both DNs must be identified to the BCM as Caller ID capable sets.
Figure 8: ISDN DNs - Line Assignment
The next steps consist of giving the ISDN DNs access to the PRI network facilities. In this BCM, the PRI lines
have been assigned to the pool PRI-A; use the "add" command highlighted in the figure below.
Figure 9: ISDN DNs - Line Pool Access
_______________________________________________________________________________________________________________________
11
NORTEL
External Distribution