BCM Technical Configuration Guide
2.5 Loops
The physical characteristics of the BRI interfaces are defined in the following steps. Follow the screen captures to
ensure that each programmable field is set correctly.
Associate both DNs to the loop.
2.6 Routing
Video calls will be dialed directly from the video unit, and will use the dialplan programmed into the BCM. For this
example, we have pre-determined that the PRI lines have been pooled into pool PRI-A, and that the access code
for this pool is 6. Follow the screen captures below to ensure that the routing in your system is consistent with the
customer preferences.
_______________________________________________________________________________________________________________________
NORTEL
V1.1
Figure 10: Loops
Figure 11: Loop - Assigned DNs
External Distribution
May, 2006
12