Setting Up An Internet Connection; (Canada) - Mercedes-Benz COMAND Operating Instructions Manual

current Internet connection. Therefore, you
cannot establish an Internet connection dur-
ing a service call.
Canada: a mobile phone must be connected
via Bluetooth ® ( page 140) or USB
Y
( page 235) with COMAND. Furthermore,
Y
you need a valid mobile service contract with
a data option, which is used to calculate the
associated connection costs.
Conditions for a Bluetooth
The mobile phone supports at least one of
R
the Bluetooth ® profiles DUN (Dial-Up
Networking) or PAN (Personal Area
Network).
The Bluetooth ® profiles DUN and PAN ena-
ble the Internet connection of the mobile
phone to be made available to the system.
Conditions for a USB connection
The mobile phone supports at least one of
R
the USB classes:
RNDIS (Remote Network Driver Inter-
-
face Specification)
CDC/NCM (Network Control Model)
-
CDC/ECM (Ethernet Control Model)
-
CDC/ACM (Access Control Model)
-
The USB classes enable the mobile phone
Internet connection to be made available to
the system.
The terms of use are shown when the system
is used for the first time and then once a year
thereafter. Only read and accept the terms of
use when the vehicle is stationary.
The driver is not permitted to call up websites
while driving and use of the Mercedes-Benz
Apps is restricted.
The availability of individual Mercedes-
i
Benz Apps may vary depending on the
country.
Setting up an Internet connection (Canada)

Setting up an Internet connection

(Canada)

Procedure and general information
If you are using Internet access for the first
time, you must enable the connected mobile
phone for Internet access (
connected mobile phone supports the Blue-
®
tooth
CDC/NCM or CDC/ECM, you do not need to
® connection
make additional settings. The Internet con-
nection is established. If the connected
mobile phone does not support the named
Bluetooth
predefined (
data (
While initializing the mobile phone for the
Internet connection, access data which is
already on the mobile phone may be over-
written. You should therefore check the set-
tings on the mobile phone (see the manufac-
turer's operating instructions).
Enabling the mobile phone for Inter-
net access
To display the main function bar: slide 5
X
the controller.
To select ®: turn and press the controller.
X
The menu with the Internet functions is dis-
played.
To switch to the menu bar: slide 6 the
X
controller.
To select Settings: turn and press the
X
controller.
page 177). If the
Y
PAN profile or the USB classes RNDIS,
®
profile or the named USB classes,
page 178) or manual access
Y
page 179) must be set.
Y
177
Z