Mobile Phone Voice Recognition; Call Waiting - Mercedes-Benz COMAND Operating Instructions Manual

Mobile phone voice recognition

150
Conference
To select
X
menu: turn and press the controller.
The new participant is included in the con-
Conference
ference call.
the telephone menu.
Incoming call during an existing call

(call waiting)

The call waiting function depends on your
mobile phone network provider and your
mobile phone. Depending on the mobile
phone used, behavior when answering a call
may vary (see the manufacturer's operating
instructions).
Call waiting: if you receive a call while
already in a call, a message is shown. You also
hear a tone. You can decide whether to
accept or reject the call.
Accepting:
To select Accept: press the controller.
X
or
Press 6 on the multifunction steering
X
wheel.
The incoming call is active, the previously
active call is on hold. You can switch back
and forth between both calls (call waiting)
( page 149).
Y
This is also the case if you accept the wait-
ing call using the Voice Control System (see
the separate operating instructions).
Depending on the mobile phone, you may
i
also be able to accept the incoming call
(call waiting) on your mobile phone. This
function and behavior depends on your
mobile phone network provider and the
mobile phone (see the manufacturer's
operating instructions).
Rejecting:
in the telephone
X
is displayed in
or
X
Ending an active call
X
or
X
Mobile phone voice recognition
You can start or end voice recognition on your
mobile phone with this function. Further infor-
mation on the voice recognition service; see
manufacturer's operating instructions.
To start the mobile phone voice recogni-
tion:
X
X
To end the mobile phone voice recogni-
tion:
To select Reject: turn the controller and
press to confirm.
Press ~ on the multifunction steering
wheel.
The behavior after the call is rejected
depends on your mobile phone and mobile
phone network provider.
Option 1: The originally active call is con-
tinued and the incoming call is rejected.
Option 2: The originally active call is ended
and the incoming call is accepted.
Option 3: Both calls are ended.
To select = in the telephone menu: turn
and press the controller.
Press ~ on the multifunction steering
wheel.
The active call is ended.
Connect the mobile phone to COMAND;
see vehicle Operator's Manual.
Press and hold the ó button on the mul-
tifunction steering wheel for more than one
second.
You can now use the mobile phone voice
recognition.