Creating - Mercedes-Benz COMAND Operating Instructions Manual

Destination entry
98
To select a destination from the selection list: turn and press the controller.
X
If the digital map provides navigable address data, you will see the destination address in the
address entry menu.
To start route calculation: select
X
Entering intermediate destinations
Introduction
You can also map the route to the destination
yourself by entering up to four intermediate
destinations. The sequence of the intermedi-
ate destinations can be changed at any time.
COMAND provides a selection of predefined
destinations in eight categories for this pur-
GAS STATION
pose, e.g.
can also use the destination entry options to
enter intermediate destinations.
Creating intermediate destinations
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the control-
X
ler.
To select Destination: turn and press the
X
controller.
Intermediate
Select
X
The destination is entered in the intermedi-
ate destinations menu.
Add New:: press the controller.
To select
X
Start
( page 90).
Y
or RESTAURANT. You
X
X
Selection
Address
Entry
Keyword
Search
From Last
Destina
tions
Destinations.
From Con
tacts
From POIs
To select a category or Other: turn and
press the controller.
After selecting a category, the POIs which
are available along the route and in the
vicinity are displayed.
COMAND first searches for destinations
along the route. The search for destinations
is then initiated in the area around the vehi-
cle position.
After selecting Other, select one of the
destination entry options.
Step
Enter a destination by
X
address (
Select a destination by
X
means of a keyword
search (
Select a destination
X
from the list of last des-
tinations (
Select a contact from
X
the address book as
the destination
( page 93).
Y
Select a point of inter-
X
est (
Y
page 88).
Y
page 91).
Y
page 93).
Y
page 93).