Mercedes-Benz COMAND Operating Instructions Manual page 113

Highway information facilitates route guidance to a POI (rest stops, highway exits) and use of
the traffic jam function. The remaining route on the highway in this case is blocked in the
direction of travel from the selected exit.
To call up the selection mode: while displaying the highway information, slide 9 the
X
controller.
The marker is on the highway information. The associated position is marked on the map.
To start route guidance and use additional functions: select a POI by turning and press-
X
ing the controller.
The POI details are displayed.
The POI can now be:
store in the address book (
R
view on the map ( page 128)
Y
R
called if a phone is connected and a phone number is available (
R
select for route guidance and a route to it calculated (
R
To use the traffic jam function: select
X
The traffic jam function appears (
Navigation announcements
Repeating navigation announcements
If you missed the current navigation
announcement, you can call it up again.
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the control-
X
ler.
To select +: turn and press the controller.
X
Repeat Spoken Driving Recomm.
If the
i
function has previously been added as a
favorite, you can alternatively select the
function using the favorites button
( page 43).
Y
Setting the volume manually
Set the volume using the thumbwheel dur-
X
ing the navigation announcement.
When you start the engine, the volume will
i
be at its lowest setting.
page 121)
Y
Detour
by turning and pressing the controller.
page 115).
Y
Switching navigation announcements
on/off
To switch off navigation announce-
X
ments: during a navigation announcement,
press the thumbwheel to the right of the
controller.
or
Press the 8 button on the multifunction
X
steering wheel during a navigation mes-
sage.
Spoken driving recommendations
The
have been deactivated.
appears.
To switch navigation announcements
X
back on: press the controller.
Select +: turn and press the controller.
X
COMAND automatically switches the naviga-
tion announcements back on when:
a new route is calculated.
R
you switch COMAND on again or start the
R
engine.
A navigation message is given if the route is
recalculated during dynamic route guidance
due to new traffic reports (
Route guidance
page 148).
Y
page 90).
Y
message
page 116).
Y
111
Z