Starting Route Calculation - Mercedes-Benz COMAND Operating Instructions Manual

Destination entry
90

Starting route calculation

The entered destination appears in the address entry menu.
Start
To confirm
X
If you select Start: the route is calculated with the current route settings (
route calculation is in progress, an arrow will indicate the direction to your destination. Once
the route has been calculated, route guidance begins. If the vehicle is traveling on a non-
digitized road, the system displays the linear distance to the destination, the direction to the
destination and the
Selection Continue: If
are calculated (
Y
( page 113).
Y
If route guidance has already been activated, a prompt will appear asking whether you wish
to end the current route guidance.
Yes Set as Intermediate
To select or
X
Yes
cancels the current route guidance and starts route calculation to the new destination.
Set as Intermediate Destination
addition to the existing destination. The intermediate destinations menu appears
( page 98).
Y
The route is calculated using digital map data. The calculation time depends on the dis-
i
tance from the destination, for example.
The calculated route may differ from the ideal route, e.g. due to roadworks or incomplete
map data. Please also refer to the notes about the digital map (
To call up the keyword search: select the magnifying glass by sliding 6, turning and
X
pressing the controller.
For further information on the keyword search (
To view the vicinity of the destination: to select :, turn and press the controller.
X
You can explore the destination area.
Requirement for exploring a destination (USA): mbrace must be activated for Internet access
( page 176).
Y
or Continue: press the controller.
Road Not Mapped
message.
Calculate Alternative Routes
page 85). You can display these and select them for route guidance
Destination: turn and press the controller.
adds the newly entered intermediate destination in
is activated, alternative routes
page 133).
Y
page 91).
Y
page 84). While
Y