Bluetooth - Mercedes-Benz COMAND Operating Instructions Manual

Bluetooth

® audio mode
230
For some Bluetooth
pairing must be confirmed within 10 sec-
onds.
If the number code displayed on COMAND
X
and on the Bluetooth
same, select Yes: press the controller.
If you select Yes, authorization continues
and the Bluetooth
ted. Playback starts.
If you select No, authorization will be can-
celed.
External authorization
If COMAND does not find your Bluetooth
audio device, this may be due to particular
security settings on your Bluetooth
device. In this case, check whether your Blue-
tooth ® audio device can locate COMAND.
The Bluetooth ® device name for COMAND is
MB Bluetooth.
X Switch on Bluetooth
( page 232).
Y
To switch to the menu bar: slide 6 the
X
controller.
To select Options: turn and press the con-
X
troller.
Bluetooth Audio
To select
X
press the controller.
Connect via Audio
To select
X
turn and press the controller.
®
audio devices, the
® audio device is the
® audio device is connec-
®
® audio
® audio mode
Devices:
Device:
Authorizing
X Start the authorization on your Bluetooth
audio device (see the manufacturer's oper-
ating instructions).
After successful authorization, the Blue-
tooth ® audio device is connected and
starts playing.
With some Bluetooth ® audio devices, play-
back must first be started on the device itself
so that COMAND can play the audio files.
Device-specific information on authorizing
and connecting Bluetooth
phones can be found on the Internet at
http://www.mercedes-benz.com/
connect.
Reconnecting a Bluetooth
device
®
The Bluetooth audio profiles are connected
automatically under the following circum-
stances:
one of the last two mobile phones to have
R
been connected has also been used as a
Bluetooth ® audio player (if this function is
supported by the mobile phone).
the mobile phone is automatically connec-
R
ted. The Bluetooth ® audio player is then
connected.
For an automatic connection with
i
COMAND, the telephone must be within
range.
For most Bluetooth ® audio devices, the
"automatic connection" must be activated
by checking a box. Depending on the
device used, this prompt often takes place
when authorizing (see the manufacturer's
operating instructions).
No Bluetooth Audio Device Con
If the
nected
message appears, you have two
options to reconnect the Bluetooth
device.
®
® -capable mobile
® audio
®
audio