Conditions For Access; Setting Up An Internet Connection (Canada) - Mercedes-Benz COMAND Operating Instructions Manual

Conditions for access

USA: to use Mercedes-Benz Apps and Inter-
net access, mbrace must be activated and
operational. Furthermore, mbrace must be
activated for Mercedes-Benz Apps and Inter-
net access. Take note of the connection pri-
orities. An emergency call has the highest pri-
ority. When a service call, e.g. a breakdown
service call or the MB Info Call, is active, an
emergency call can still be initiated. A service
call, on the other hand, has priority over a
current Internet connection. Therefore, you
cannot establish an Internet connection dur-
ing a service call.
Canada: a mobile phone must be connected
®
via Bluetooth ( page 104) with COMAND.
Y
Furthermore, you need a valid mobile service
contract with a data option, which is used to
calculate the associated connection costs.
Conditions for a Bluetooth
The mobile phone supports at least one of
R
®
the Bluetooth profiles DUN (Dial-Up
Networking) or PAN (Personal Area
Network).
®
The Bluetooth profiles DUN and PAN ena-
ble the Internet connection of the mobile
phone to be made available to the system.
The terms of use are shown when the system
is used for the first time and then once a year
thereafter. Only read and accept the terms of
use when the vehicle is stationary.
The driver is not permitted to call up websites
while driving and use of the Mercedes-Benz
Apps is restricted.
i
The availability of individual Mercedes-
Benz Apps may vary depending on the
country.

Setting up an Internet connection (Canada)

Setting up an Internet connection
(Canada)
Procedure and general information
USA: to use Mercedes-Benz Apps and Inter-
net access, mbrace must be activated and
operational. Furthermore, mbrace must be
activated for Mercedes-Benz Apps and Inter-
net access. No further settings are required.
Canada: in order to set up a mobile phone for
Internet access, the mobile phone must be
connected via Bluetooth
COMAND. If you are using Internet access for
the first time, you must enable the connected
mobile phone for Internet access
(
Y
supports the Bluetooth
not need to make additional settings. The
Internet connection is established. If the con-
nected mobile phone does not support the
®
connection:
named Bluetooth
(
Y
(
Y
Enabling the mobile phone for Inter-
net access
X
X
X
X
X
X
page 137). If the connected mobile phone
®
®
profile, predefined
page 138) or manual access data
page 138) must be set.
To call up the telephone menu: press the
% button.
To switch to the main function bar: slide
5 the controller.
To select TEL/®: press the controller. TEL/
To select Internet Internet: turn and press the
controller.
The menu with the Internet functions is dis-
played.
To switch to the menu bar: slide 6 the
controller.
To select Settings: turn and press the Settings
controller.
®
( page 104) with
Y
PAN profile, you do
Z
137