Connecting/Disconnecting A Mobile Phone; Searching For A Mobile Phone - Mercedes-Benz COMAND Operating Instructions Manual

Procedure and general information
Authorizing a mobile phone (connect-
ing)
Before using your mobile phone with
COMAND for the first time, you will need to
search for the phone (
authorize it ( page 106). Depending on the
Y
mobile phone, authorization either takes
place by means of Secure Simple Pairing or by
entering a passkey. COMAND automatically
enables the procedure suited to your mobile
phone. You can recognize Secure Simple Pair-
ing by a code which is displayed in COMAND
and on the mobile phone. You can recognize
the passkey system by the fact that you have
to enter a code on the mobile phone and in
COMAND. The mobile phone is connected
automatically after authorization. Further
information about automatically reconnect-
ing authorized mobile phones (
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. You can also
start the search procedure and authorization
on the mobile phone (
Device-specific information on authorizing
and connecting Bluetooth
phones can be obtained from your authorized
Mercedes-Benz Center or via the Internet at
http://www.mercedes-benz.com/
connect.
You can authorize up to 15 mobile phones.
Only one mobile phone can be connected to
COMAND at any one time for telephony.
De-authorizing (disconnecting) a mobile
phone
The connection is terminated automatically if
you leave the receiver range of COMAND or
®
deactivate Bluetooth
If you no longer want the Bluetooth
tion to be established automatically, the
mobile phone must be de-authorized (discon-
nected) ( page 108).
Y

Connecting/disconnecting a mobile phone

page 105) and then
Y
page 107).
Y
page 107).
Y
®
-capable mobile
on your mobile phone.
®
connec-

Searching for a mobile phone

To call up the telephone menu: press the
X
% button.
To switch to the menu bar: slide 6 the
X
controller.
To select Connect Device Connect
X
troller and press to confirm.
The device list is displayed.
To select Search for Phones Search for
X
press the controller.
A message is displayed that Bluetooth
must be activated on the mobile phone and
must be made visible to other devices.
To select Start Start Search Search: press the con-
X
troller.
The available mobile phones are displayed
in the device list.
The duration of the search depends on the
®
number of Bluetooth
range and their characteristics.
If a new phone is found, it appears in the
device list with the Ï symbol. You can now
authorize (connect) the mobile phone found
( page 106).
Y
If the maximum number of authorized devices
in the device list is reached, you will be
requested to de-authorize a mobile phone
( page 108).
Y
When you call up the device list again, de-
authorized devices will be removed from the
list. To update the device list, start the search
again.
Device: turn the con-
Phones: turn and
®
telephones within
Z
105