Connecting Computers To The Display; Viewing A Connected Computer's Input - Smart Technologies SMART Board SBID-7075P User Manual

CHAPTER 2
USING THE DISPLAY

Connecting computers to the display

You can connect computers with SMART software to the display as shown below.
NOTES
To interact with content, connect a USB cable to the appropriate USB Type-B receptacle on
l
the connector panel or convenience panel (as shown in the above diagrams).
Your organization's installers might have connected cables to the connector panel or the
l
convenience panel and run the cables behind a wall or under the floor to a desk or table
where you can place your computer.

Viewing a connected computer's input

Use the Input app to view a connected computer's input on the display.
To view a connected computer's input
1. Connect the computer to the display.
2. Tap the Home button
The launcher appears.
20 smarttech.com/kb/171163
at the bottom of the screen.