Garmin G1000 NXi Supplemental Maintenance Manual page 148

5. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate
the large FMS knob to highlight "0X – XXX" (where 0X is the menu position and XXX is
the airframe type) and press ENT key on the PFD.
6. Rotate the small FMS knob to display the drop down menu. Rotate the large FMS knob
to highlight "Baseline Option – GDL 69A SXM Installation" or "Baseline Option –
Legacy – GDL 69 Installation" as applicable. Press ENT key on the PFD.
7. Press the CLR ALL softkey.
8. Using the large FMS knob scroll down to the GDL software box and press ENT.
9. Scroll down to the GDL configuration box and press ENT.
10. Press the Load softkey.
11. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
If the software load fails, cycle power to the GDL 69A only and confirm
that the software part number and version are updated in the DATA
window on the MFD. Then, press ENT button on the PFD to check the
GDL 69A SXM SOFTWARE and CONFIGURATION check boxes and
press LOAD softkey again to resume the software update.
12. Press ENT key on the PFD to acknowledge upload complete.
13. Deactivate cursor.
14. Scroll to the Configuration Manager page.
15. Press the CNFM CFG softkey.
16. Select ok when prompted to "Confirm configuration as expected configuration"
17. Power cycle the system verify there are no red-Xs or system alerts.
18. If red-Xs or system alerts are present, troubleshoot as necessary using Section 5.
19. If there are no red-Xs or system alerts, continue to Section 7.11.3.
GDL 69A Test
If a SiriusXM Satellite Radio subscription has already been activated for the GDL 69A/69A
SXM, then power up the G1000 and go to the Aux – Information page and verify that the GDL
69A/69A SXM is working properly. Refer to the Cockpit Reference Guide, listed in Table 1-2,
for details on Sirius XM Radio weather and music operation.
If the GDL 69A/69A SXM is replaced (new unit), the owner must re-activate the subscription,
using the new GDL 69A/69A SXM's Radio ID number(s). Refer to the GDL 69A/69A SXM
Satellite Radio Activation Instructions, listed in Table 1-2, for details on the activation process.
As a final operations check, make sure there are no MANIFEST errors shown on the PFD for
the GDL 69A/69A SXM.
If no other service is to be performed, continue to the return-to-service checks in Section 9.
G1000 Supplemental Maintenance Manual
Textron Nav III Series
190-02128-04
NOTE
Page 7-43
Revision 3