Replacing Seat Saddles; Replaxing X-Brace; Replacing Anti-Tipper Socket; Replacing Battery Rails - Invacare Mirage Service Manual

Invacare® Mirage

5.6.2 Replacing Seat Saddles

• 4 mm Allen key
• 10 mm wrench
1. Loosen and remove bolt A, nut E and washer D of
seat saddle B.
2. Replace seat saddle.
3. Install parts in reverse order.
4. Test all functions.

5.6.3 Replaxing X-Brace

• 4 mm Allen key
• 5 mm Allen key
• 10 mm wrench (2x)
• 13 mm wrench (2x)
• 17 mm wrench (2x)
16
Fig. 5-2
1. Remove bolts which clamp U brackets (14), seat stay
(11) and side frames (13 and 3).
2. Remove U bracket (14).
3. Locate large bolts at bottom of each side of X Brace
(8). Remove bolts
4. Remove X Brace (8) from side frames (3 and 13).
5. Replace further parts of X Brace (8) if required:
a. Push bearings out from short bottom tubes of X
Brace.
b. Remove bolt and spacer which supports seat stays
(11) to remove seat stays
c. Remove bolt and spacers to replace X Brace centre
pivot.
d. Remove seat clamp (7).

5.6.4 Replacing Anti-Tipper Socket

• 4 mm Allen key
• 10 mm wrench
1. Remove bolt A, nut D and washer C.
2. Pull anti-tipper socket B out of side frames.
3. Install parts in reverse order.
4. Test all functions.

5.6.5 Replacing Battery Rails

• 13 mm wrench (2x)
Fig. 5-3
Fig. 5-4
1441763-E