Moving Data (Track Move); Moving The Repeated Portion (Ab) - Boss BR-864 Owner's Manual

Editing the performance on a track (Track Editing)
fig.02-319d
4. Turn the TIME/VALUE dial to select "ALL" and press
[ENTER].
fig.02-320d
5. Use CURSOR [
] [
select the track/V-Track to copy from, and track/V-
Track to copy to.
6. When you are ready to execute the copy, press
[ENTER].
The display will ask "Are you sure?," so that you can
confirm the operation.
7. Press [ENTER].
The copy is executed.
8. Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, "Keep power on!" appears in the upper line
of the display, while the lower line shows what is being
processed.
76
] and the TIME/VALUE dial to

Moving data (Track Move)

Track Move allows you to move a specific portion of data to
a different location.
* After the data is moved, the location it was in will be left
empty.
The three types of Track Move are given below.

Moving the repeated portion (AB)

Perform the procedure given below to move the portion from
the repeat start (A) to the repeat end (B).
Ex. 1: Moving twice to the same track
fig.02-321
Repeat Repeat
Start (A) End (B)
Ex. 2: Moving twice to another track
fig.02-322
Repeat Repeat
Start (A) Start (B)
1. Press [UTILITY].
2. Press CURSOR [
] [
and press [ENTER].
fig.02-323d
TO Time
TO Time
] to move the cursor to "TRK,"