Moving By Specifying The Time (Tme/Mes) - Boss BR-864 Owner's Manual

3. Press CURSOR [
] [
"MOV," and press [ENTER].
fig.02-324d
4. Turn the TIME/VALUE dial to select "AB" and press
[ENTER].
fig.02-325d
5. Use CURSOR [
] [ ] and the TIME/VALUE dial to
select the track/V-Track to move from, and track/V-
Track to move to.
6. Press [ENTER].
fig.02-326d
7. Use CURSOR [
] [ ] and the TIME/VALUE dial to
specify the time of the beginning of the location "T"
(To) where you want the data to be moved.
8. When you are ready to execute the move, press [ENTER].
The display will ask "Are you sure?," so that you can
confirm the operation.
9. Press [ENTER].
Move Event is executed.
10. Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, "Keep power on!" appears in the upper line
of the display, while the lower line shows what is being
processed.
Editing the performance on a track (Track Editing)
] to move the cursor to
Moving by specifying the time
(TME/MES)
Perform the procedure given below to move the portion
between specific times.
Ex. 1: Moving twice to the same track
fig.02-327
START END
Ex. 2: Moving twice to another track
fig.02-328
START END
1. Press [UTILITY].
2. Press CURSOR [
] [
and press [ENTER].
fig.02-329d
3. Press CURSOR [
] [
"MOV," and press [ENTER].
fig.02-330d
4. Turn the TIME/VALUE dial to select "TME/MES" and
press [ENTER].
TO Time
TO Time
] to move the cursor to "TRK,"
] to move the cursor to
77