Moving Data (Track Move) - Boss MICRO BR Owner's Manual

fig.Disp-TrEdit-repeat.eps
* If you're moving data, skip step 5.
* If you're erasing data, skip steps 4–5.
6.
Press [TR4] (EXE).
You can also specify the time by using
or to move, or by setting it
with +
+ (end of song).
• The parameters you need to set will depend
on the type of track edit operation you select
and on the edit region you specify. (You'll
need to set the parameters marked by ✔.)
CPY:Copy Start
✔
TIM, MEA
ALL
AB *
MOV:Move Start
✔
TIM, MEA
ALL
AB *
ERS:Erase Start
✔
TIM, MEA
ALL
AB *
* If you want to copy/move/erase the AB region,
you must set point A and point B beforehand (p.
45).
* The edited content is preserved when you return from
the track edit screen to the play screen.
(time 00:00:00) or
End To Repeat
✔ ✔ ✔
✔ ✔
✔ ✔
*
End To
✔ ✔
✔
✔
*
End
✔
*

Moving data (Track Move)

This operation moves the data of the specified
region (or the entire track) to another location.
* Following this operation, the original location of the
moved data will be empty (containing no data).
Example 1: Moving within the same track
fig.02-340
Start or
Repeat start point (A)
End or Repeat end point (B)
Example 2: Moving to a different track
fig.02-350
Start or
Repeat start point (A)
End or Repeat end point (B)
1.
Press [UTILITY].
2.
Press [TR2] (TRK).
The TRACK EDIT screen appears.
fig.Disp-TRACK-EDIT.eps
3.
Press [TR2] (MOV).
The track setting screen appears. Specify the
source and destination tracks for the Move
operation.
fig.Disp-Move-TR1-V1.eps
Destination (Track - V-track)
Source (Track - V-track)
Section 2. Editing
To Time
To Time
57