Insert Effect Parameter Functions; Setting Procedure - Boss BR-864 Owner's Manual

Insert Effect Parameter Functions

Setting Procedure

1. Press [EFFECTS].
The Effect Settings screen appears.
fig.04-101d
P: Preset / S: Song / U: User
Algorithm
Bank
Name
2. Select an effect patch.
Use CURSOR [ ] [
select the bank, Preset/Song/User, and patch number.
3. Press CURSOR [
] to move the cursor to "EDIT," and
press [ENTER].
The Edit Effect screen appears and the algorithm (the
connection sequence for the effects being used) is
displayed.
fig.04-102d
When effect patches in the SIMUL bank are selected,
"GTR" and "MIC" appear.
Move the cursor to "GTR" to modify a guitar-use effect,
or to "MIC" to modify an effect for use with a mic, then
press [ENTER].
fig.04-103d
By pressing [ENTER] while the cursor is at a bank–
number, you can display the Edit Effect screen directly.
110
Number Patch Name
] and the TIME/VALUE dial to
4. Press CURSOR [
] [
effect and turn the TIME/VALUE dial to turn each
effect on or off.
Blocks that are turned on are shown in uppercase letters,
while blocks that are turned off are shown in lowercase
letters. Turn on the effects that you want to use.
fig.04-104d
5. Press CURSOR [
] [
effect with the parameter that you want to change and
press [ENTER].
The Parameter Setting screen for each effect appears.
fig.04-105d
6. Use CURSOR [
] [
the TIME/VALUE dial to edit the value.
7. If you would like to edit another effect, press [EXIT] to
return to the previous screen, and repeat steps 5–6.
8. If you wish to save the current effect settings, perform
the procedure described in "Saving insert effect
settings" (p. 58).
Edited effect settings are temporary. If you exit the Edit
Effect screen without saving the effect patch you
changed, "TMP" appears next to the indication of the
bank.
Be aware that if you select a new effect patch while
"TMP" is displayed, the altered effect patch is returned
to its original settings and the changes are lost.
] to move the cursor to each
] to move the cursor to the
] to select a parameter, and turn