Mastering - Boss BR-864 Owner's Manual

5. Press [PLAY].
The [REC] and REC TRACK buttons stop flashing in red
and instead light solidly, and recording starts.
fig.00-447
6. When you finish recording, press [STOP].
The REC TRACK button lights alternately in orange and
green, indicating that track contains recorded data.
* During updating, "Keep power on!" appears in the upper line
of the display, while the lower line shows what is being
processed.
If, after you've finished bouncing tracks, the BR-864 then
automatically switches to an empty V-track in order to
set up a recording-destination track other than the one to
which sounds have been bounced.
Lit
Recording/playing back a song

( 11 ) Mastering

After bouncing and getting the performance data down to
two tracks, apply the "Mastering Tool Kit" to obtain a master
with optimized levels.
fig.00-448a
1
8 7 6
1. Press [REC MODE] repeatedly until "MASTERING" is
indicated for REC MODE at the left of the screen.
fig.00-448d
: V-Tracks with recorded data.
: V-Tracks without data.
"What are V-Tracks?" (p. 14)
2. Press cursor [
] [ ] and turn the TIME/VALUE dial
to select the source tracks and V-Tracks from which
you want to record.
3. Press [ENTER].
fig.00-449d
2,4
3,5
2,4
43