Creating A Master Tape; Recording To A Cassette Tape Recorder (Analog Connection); Recording To A Digital Recorder (Digital Connection); Disabling Digital Copying - Boss BR-864 Owner's Manual

Creating a master tape

This process involves recording the finished song to your
recorder (cassette tape recorder, CD recorder, etc.) and
making a master tape.
Recording to a cassette tape
recorder (analog connection)
1. Connect the BR-864's LINE OUT jacks to the cassette
tape recorder's input jacks.
fig.02-501a
Cassette tape
Recorder
2. Put the cassette tape recorder in record mode.
3. Press [PLAY] on the BR-864 and start the playback of
the recorded data.
86
Recording to a digital recorder
(digital connection)
1. Connect the BR-864's DIGITAL OUT connector to the
digital recorder's input connector.
fig.02-501b
Digital Recorder
(CD Recorder etc.)
2. Set the digital recorder so it is ready to record digital
signals.
3. Put the digital recorder in record mode.
4. Press [PLAY] on the BR-864 and start the playback of
the recorded data.

Disabling digital copying

When recording from the BR-864 to a digital recorder, you
can prevent further digital copying of the master tape to any
other digital recorders.
1. Press [UTILITY].
2. Press CURSOR [
] [
and press [ENTER].
fig.02-501d
3. Press CURSOR [
] [
"DPRT," and press [ENTER].
The Digital Copy Protect screen appears.
] to move the cursor to "EDT,"
] to move the cursor to