Roland V-Synth Owner's Manual page 132

Effects List
31: Enh Cho/Flg
(Enhancer Chorus/Flanger)
This effect connects Enhancer and either Chorus or Flanger in series.
fig.MFX-31
L
Chorus/
Enhancer
Flanger
R
Parameter Value
Enhan Sens #1 0–127
Enhan Frequen- 0–127
cy
Enhan Mix Lev- 0–127
el
Enhan Level 0–127
Mod Mode CHORUS,
FLANGER
Mod Rate #2 0.05–10.0 Hz,
note
Mod Depth 0–127
Mod Phase 0–180 deg
Mod Pre Delay 0–50.0 ms
Mod Feedback -98– +98 %
Xover LowFreq 50–4000 Hz
Xover Low Gain -36–0 dB
Xover HiFreq 2000–20000 Hz
Xover Hi Gain -36–0 dB
Mod Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
132
2-Band
EQ
Description
Sensitivity of the enhancer
Sets the lower limit of the fre-
quencies to which the enhance-
ment effect is added.
Level of the overtones generated
by the enhancer
Volume of the enhancer sound
Selects whether to use chorus or
flanger.
Adjusts the speed of modulation
for the chorus or flanger.
Adjusts the depth of modulation
for the chorus or flanger.
Sets how the chorus or flanger
sound is spread.
Adjusts the delay time from the
direct sound until the chorus or
flanger sound is heard.
Adjusts the proportion of the ef-
fect sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Attenuates the effect in the
range below the specified fre-
quency.
Specifies how greatly the low
range will be attenuated.
Attenuates the effect in the
range above the specified fre-
quency.
Specifies how greatly the high
range will be attenuated.
Volume of the chorus or flanger
sound.
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
32: Enh Delay (Enhancer Delay)
This effect connects an Enhancer and a Delay in series.
fig.MFX-32
L
Enhancer Delay
R
Parameter Value
Enhan Sens #1 0–127
Enhan Frequen- 0–127
cy
Enhan Mix Lev- 0–127
el
Enhan Level 0–127
Delay Time 0–1300 ms, note Adjusts the delay time from the
Delay Feedback -98– +98 %
#2
Low Damp Freq 50–4000 Hz
Low Damp -36–0 dB
Gain
Hi Damp Freq 2000–20000 Hz
Hi Damp Gain -36–0 dB
Delay Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
2-Band
EQ
Description
Sensitivity of the enhancer
Sets the lower limit of the fre-
quencies to which the enhance-
ment effect is added.
Level of the overtones generated
by the enhancer
Volume of the enhancer sound
direct sound until the delay
sound is heard.
Adjusts the proportion of the de-
lay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the
delay sound quicker than other
bands, which makes for a clearer
delay effect.
Degree of Low Damp
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first, makes
the delay sound more natural.
Degree of High Damp
Volume of the delay sound.
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range