2.5" Drive Hot-Swap Backplane Overview; Figure 13. 2.5" Hot-Swap Backplane And Drive Bay Assembly; Figure 14. Sff-8482 Connector On Hsbp - Intel JBOD 2000 Hardware Manual
Storage server system
Hide thumbs
Also See for JBOD 2000:
- Quick installation user's manual (15 pages) ,
- Service manual (42 pages)
Table of Contents
Advertisement
Intel® Storage Server System JBOD 2000 Family Hardware Guide
System Storage and Peripheral Drive Bays Overview
3.1.1
2.5" Drive Hot-Swap Backplane Overview
Depending on the number of hard disk drives supported by a given system SKU, a system can
be configured with one, two, or three 8-drive backplanes. Each backplane is attached to the
back of the drive bay assembly.
Figure 13. 2.5" Hot-Swap Backplane and Drive Bay Assembly
On the front side of each backplane are mounted eight hard disk drive interface connectors (A),
each providing both power and I/O signals to the attached hard disk drives.
Figure 14. SFF-8482 Connector on HSBP
Revision 1.42
13
Advertisement
Table of Contents
